All public logs
From Bloominglabs
Combined display of all available logs of Bloominglabs. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(Latest | Earliest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 09:42, 31 March 2017 Avh.on1 (Talk | contribs) uploaded "File:Pong-v2.zip" (Second reincarnation of arduino-driven pong game on an oscilloscope. Just like the first, this was written in one (long) night by Alex Von Hoene.)
- 16:13, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger whiteboard-schematic.jpg" (Schematic of the Krieger Dreamer Peeper drawn immediately before its construction.)
- 15:50, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger top.jpg" (Top view of the Krieger Dreamer Peeper, showing how the barrel is attached to the body.)
- 15:48, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger side.jpg" (Left view of the Kriedger Dreamer Peeper.)
- 15:47, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger right.jpg" (Front-right view of the Krieger Dreamer Peeper.)
- 15:45, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger light-and-squirt-detail.jpg" (Detail of the front of the Krieger Dreamer Peeper, showing how the pump from the squirt gun was fitted into the barrel. The Brass rod plugs the top of the reservoir, and the trigger (or "key") is fitted immediately before operation.)
- 15:39, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger iso-front.jpg" (Front view of the Krieger Dreamer Peeper, showing the squirt gun and fan-grill "dream condensate collimator")
- 14:01, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger high-amperage-connection-detail.jpg" (Detail showing how the 10-watt LEDs were nailed to brass strips, and how the ends of the brass strips were wrapped around the wires that supply power.)
- 13:59, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger electronics-detail.jpg" (The electronics of the Krieger Dreamer Peeper, with very ad-hoc construction. - The switch on the lower-right turns the Peeper on. - ATTiny85 is on bottom-middle. It generates science-fiction sound effects and flashes the lights. - LM7805 voltage regul...)
- 13:47, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger disassebled-parts.jpg" (All of the non-wood components of the Krieger Dreamer Peeper after disassembly.)
- 13:36, 1 February 2017 Avh.on1 (Talk | contribs) uploaded "File:Krieger back-right.jpg" (Back-right view of Alex's "Krieger Dreaer Peeper", showing the slot where the mp3 player plugs in, the Parrot AR battery, and the terminals of the capacitor.)
- 02:13, 10 November 2016 Avh.on1 (Talk | contribs) moved page PrintrBot to PrintrBot Simple (We now have two printrbot 3d printers)
- 14:42, 27 October 2016 Avh.on1 (Talk | contribs) uploaded "File:DriveLightsTest.flac.gz" (Flac version of DriveLightsTest.wav.gz: a 4-second sound that is all silent, except for a 0.05-second long period starting at t=2 seconds where the level is at maximum. Used to drive a logic-level mosfet off of a 3.5 mm headphone jack. It turns out th...)
- 03:27, 27 October 2016 Avh.on1 (Talk | contribs) uploaded "File:DriveLightsTest.wav.gz" (A gzipped file containing a 4-second sound (Microsoft .wav) that is mostly silent, except for 0.05 seconds starting at t=2 seconds where the level is at maximum. This is a test of the signal used to drive the LEDs in avh.on1's Krieger Dreamer Peeper.)
- 23:18, 25 October 2016 Avh.on1 (Talk | contribs) uploaded "File:Futuristic-logo.png" (Early version of the bloominglabs logo with the "Final Frontier" font and the original flowergear.)
- 23:09, 25 October 2016 Avh.on1 (Talk | contribs) uploaded "File:Bloominglabs-logo-nobg.png" (Blooming-gear logo, taken from the top-left corner of the wiki on 25 October 2016)
- 23:57, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:14 disassembled.jpg" (A mostly-dissasembled Baofeng UV-82 handheld transceiver. Top: antenna Second from top: volume knob Third row: antenna retaining ring, volume knob retaining ring Bottom row: battery, belt clip, main circuit board and back case, front case (still held t...)
- 23:54, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:13 keypad.jpg" (The removable rubber keypad of a Baofeng UV-82.)
- 23:53, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:12 rubber jack seal.jpg" (Piece of rubber that seals the input and output jacks of a Baofeng UV-82. It is in between the case and the circuit board.)
- 23:53, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:11 remove back.jpg" (Removing the back of the case of a Baofeng UV-82. If the retaining rings on the antenna connector and volume knob have been removed, it will lift and slide out easily.)
- 23:52, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:10 bottom popped out.jpg" (The clips holding the bottom of a Baofeng UV-82 case together, separated.)
- 23:51, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:9 unpry bottom clips.jpg" (Prying the bottom of the case of a Baofeng UV-82 apart with a small screwdriver.)
- 23:51, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:8 remove volume retainer.jpg" (Unscrewing the recessed retaining ring for the volume knob of a Baofeng UV-82.)
- 23:50, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:7 remove antenna retainer.jpg" (Unscrewing the recessed retaining ring for the antenna connector of a Baofeng UV-82.)
- 23:49, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:6 remove volume knob.jpg" (Lifting off the volume knob of a Baofeng UV-82.)
- 23:48, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:5 unscrew antenna.jpg" (Removing the antenna of a Baofeng UV-82.)
- 23:48, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:4 remove battery.jpg" (Removing the battery of a Baofeng UV-82.)
- 23:48, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:3 unclip battery.jpg" (Squeezing the clips to remove the battery of a Baofeng UV-82.)
- 23:47, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:2 remove belt clip.jpg" (Unscrewing the belt clip of a Baofeng UV-82.)
- 23:46, 27 April 2016 Avh.on1 (Talk | contribs) uploaded "File:1 whole radio.jpg" (Baofeng UV-82 handheld transceiver, fully assembled.)